5586-5
Netcom’s 5586 is a digitally tunable filter covering the frequency range of 225 to 520MHz. The filter has been designed using new commercially available high voltage drivers and a new generation CPLD, which allows for improved performance and reduced cost while at the same time providing increased functionality. A control interference is provided to accept either parallel data and strobe or serial data, clock and strobe. The filter incorporates high voltage totem-pole drivers for the PIN diode bias voltage to minimize current draw from the 100 VDC supply.
- Specifications
- Performance
- Mechanical
- Ordering Information
- Evaluation
Specifications
| Frequency Range | 225 to 520 MHz | ||
| Available BW | 7% | ||
| *Ftune +/- 10% Rejection (Typical) | N/A | ||
| *Ftune +/- 15% Rejection (Typical) | N/A | ||
| *Ftune +/- 20% Rejection (Typical) | N/A | ||
| Insertion Loss (Typical) | 4.8 dB | ||
| Impedance (Input /Output) | 50 Ω | ||
| Switching Speed, 90% RF Power | 15 µs | ||
| Tuning Channels | 250 | ||
| P1dB | N/A | ||
| IIP3 (+18dBm input) | N/A | ||
| Noise Figure | N/A | ||
| DC Inputs | |||
| +5 Volts (±0.5 Volts) | 250 mA | ||
| +100 Volts (-7, +25 Volts) | 0.2 mA (typical)
0.6 mA (maximum) |
||
| Operating Temperature Range | -40 to +85°C | ||
| Control Interface | – Selectable 8 bit Parallel or Serial
– TTL and CMOS Compatible |
||
| Dimensions [L x W x H] | 2.30 x 1.40 x 0.55 inches
58.42 x 35.56 x 13.97 mm |
||
Performance
Mechanical
Ordering Information
Evaluation
