
5588-7
Netcom’s 5588 is a digitally tunable filter covering the
frequency range of 30 to 520MHz. The filter has been designed using
three bands of tunable filters from Netcom’s proven 5500 Series.
This tri-band filter is offered in a smaller integrated SMT package
to support applications where compact design, power requirements and board layout flexibility is important. It meets the vibration and shock requirements of systems used in ground-mobile and airborne environments. Commercially available high
voltage drivers and a new generation CPLD have been used
to achieve improved performance and reduced cost while at the
same time providing increased functionality. The filter
incorporates high voltage totem pole drivers for the PIN diode bias
voltage to minimize current draw from the 100 VDC supply.
- Specifications
- Performance
- Mechanical
- Ordering Information
- Evaluation
- Serial Address
Frequency Range | 30 to 520 MHz |
Available BW | 7% |
*Ftune +/- 10% Rejection (Typical) | -15 dB |
*Ftune +/- 15% Rejection (Typical) | N/A |
*Ftune +/- 20% Rejection (Typical) | N/A |
Insertion Loss (Typical) | 3.1 dB |
Impedance (Input /Output) | 50 Ω |
Switching Speed, 90% RF Power | 50 µs |
Tuning Resolution | 100 kHz |
P1dB | +29 dBm |
IP3 | +40 dBm |
Noise Figure | < 1.2 dB above Insertion Loss |
DC Inputs | |
+5 Volts (±0.5 Volts) | 290 mA |
-150 Volts (-7, +25 Volts) | 1.0 mA |
Operating Temperature Range | -40 to +85°C |
Control Interface | – SPI Serial Input |
Dimensions [L x W x H] | 2.80 x 2.00 x 0.50 inches
71.12 x 50.80 x 12.70 mm |